Flysurfer Stoke 3
£855.00 GBP
Ask a question
The Flysurfer Stoke 3 is a big step up and this kite really works well as an all rounder. It is more focused on waves than big air, but works great for freestyle and freeriding. Especially for those looking for a bit more grunt.
Don’t set any limits, because Flysurfer didn’t during the development of the Stoke either! With the Streamlined Construction, we herald the next generation of our L.E.I. kites and implement our vision of durable lightweight construction for the first time.
The innovation starts with the selection of our materials and their optimal assembly. The manufacturing process was optimized to prevent potential weak points and achieve the most advanced aerodynamically clean construction.
The Wind Range Chart is to be used as a point of reference. It is based on a rider who weighs around 75kg (165lbs.) Actual use will vary depending on your weight, skill level, board size and the wind conditions on the Water or Land. When choosing the Kite size always use common sense and always choose a smaller size if you are not sure, especially when using the kite on land.
Designed for manufacturing, developed to cover a broad wind range, and built to reach maximum longevity. We rely exclusively on frequently tested raw materials, and components to achieve our vision of a long-lasting lightweight canopy frame. Benefit from a very light, aerodynamically efficient, and cleanly finished construction. Because quality is, what we stand for!
The bridle system, supported by pulleys, affects the twist and balance of the kite. Pull tighter loops and rely on high stability in gusty winds. It also improves the relaunch and makes it accessible. The movable bridle anchor points avoid tension peaks by distributing forces optimally to the leading edge. The spliced lines offer maximum security without tangles or snags while also minimizing drag. The bridle system can be easily removed and replaced.
SLC-TEX stands for Special Coated Longevity Textile. The advantages of the canopy material’s uniform coating are excellent tearing strength, high UV resistance, and persistent air-tightness. The 3×3 yarn combination is as light as a 2×2 yarn and as strong as any 4×4 yarn solution. Particularly suitable for long-term use, the material has superb aging characteristics. During our aging tests, the SLC-TEX has 60% less porosity and 30% higher tear strength.
The Profile Support helps us decrease the strut diameter, saving weight, and is a key element of the kite’s broad wind range. We use high-performance profiles to increase speed, reduce drag and keep the kite accelerating when it recovers after a loop or bottom turn. The advantage in comparison to a fixed strut canopy lies in its deformation, letting the kite depower more efficiently and giving the rider a forgiving feel.
