Ozone Go Trainer

As low as £155.00
In stock
SKU
ozone-go

Designed to bring out the kiter within everyone, the Ozone Go Trainer is smooth and stable with steady response and power to ensure easy progression into all kite sports.

The unique Single Surface design generates constant power with low airspeed, resulting in easy and forgiving handling.

Having only one layer of strong material means there is no air held inside the kite, which makes it extra resistant to crash damage. With only one surface, it is extremely lightweight and very efficient to pack away.

The simple 2-line Control Bar with Wrist Leash gives you the ability to land the kite by yourself. If you feel too much power or are ever unsure all you have to do is let go of the bar and the kite will land on one line.

Whatever your age or Kiting ambitions, the GO V1 is the perfect trainer kite to get you started in the most exciting new sport on the planet. Children should use in winds less than 10mph and always be under careful adult supervision.

Available in a 1.5m with 3 colourway options.

Features:
  • Ozone Go Power Kite
  • Ozone 2-Line Set
  • Ozone 2-Line Control Bar with Safety System
  • Ozone Stuff Sack
  • Detailed user manual
Flexible Package:

The Ozone Go Trainer has its own specially designed control bar. The moulded bar ends help you to keep your leader lines safely away from your hands whilst in flight, and also act as line winders to keep your lines tangle-free when you pack up. The new bar has it’s own integrated safety system, so even if you release the bar you remain attached to the kite by the safety leash.

Bridle Lines:

All bridle lines are now stitched instead of knotted like in the previous Imp. Ozone use the highest quality Dyneema from Edelrid and with the lines now stitched the maximum breaking load is increased making for an even stronger kite. Ozone's aim when designing the bridle lines is to use the least amount of line possible, to minimise parasitic drag through the air, resulting in a more performant kite. Kite design has advanced to the point where the accuracy and diameter of the line lengths is vitally important. To achieve this accuracy, Ozone use the highest quality Dyneema lines which are stitch finished for extra strength and less drag.

Flying Lines:

The flying lines are also now sleeved instead of being knotted. This increases the lines strength considerably.

Hand Checked Construction:

Utilizing highest grade Oztex 40d ripstop nylon fabric and pre-stretched dyneema control line throughout. This translates to the kite flying in lighter winds and a greater wind speed to power generated ratio and as the kite can penetrate the window deeper the up wind ability is superb. The stability is kept even with less bridling by the use of Diagonal-Rib construction, a method of strengthening the kite from inside to enable less support from the bridles.

Mylar Edged:

Aerodynamics tells us that the leading edge and the trailing edge are the two most critical lines in an aerofoil section. Ozone kites are Mylar taped on the leading edge, giving a more rigid structure, a clean and efficient aerofoil, and absolutely zero stretching. The Mylar tape effectively locks the sail shape, meaning your kite keeps it’s factory trim. For the trailing edge Ozone roll the seam twice and stitch to give a soft and clean exit for the airflow.

Double Stitched:

Ozone kites are double-needle stitched, which is stronger and more durable than single line stitching in the event of the kite being dragged over rough ground. Even the thread used for stitching the lines and sail is UV-bonded, further adding to the strength and life-span of our kites. Every seam is checked to within 0.5 mm; a look at the colour-scheme accuracy and the inside of the seams of our kites will highlight this fact.

Attachment Tabs:

The Ozone Ignition's attachment tabs are sewn deep into the reinforcement area of the ribs, which means that the load is spread over a larger area of material, thus reducing any stretching and ageing of the cloth.

Flying Lines:

Tested to 180/110kg, Ozone’s heat-treated Eurocord Dyneema SK75 lines ensure stretch resistance, a high thermal tolerance and durability for all kites. Lines are cut, pre-stretched, sleeved and stitched to ensure 100% accuracy. The lines are final load tested to 60% of their breaking strain to “lock” the line and as a final production check. The ‘kook-proof’ colour-coded and labeled line connection system makes set-up safer and completely stress-free for riders new to kiting.

Write Your Own Review
Write a ReviewOzone Go Trainer
free shipping over £50
Hassle Free Returns
Do you want
10% OFF
off your next order?
Subscribe to our newsletter and get your discount code
Code: df56s5d8